JVC V.NETWORKS VN-C11 Read Me First page 22

Preparations (Step 2 Setting the Network)
Setting the IP Address for VN-C11 with V.Networks Setup Tool (continued)
2.
Confirm the settings.
For other settings, refer to the PDF
instruction manual inside the supplied
CD-ROM.
3.
Click .
4.
Start up [V.Networks Controller]. (
Note
In a system where more than one VN-C11 are used, turn on the power for a VN-C11 first and
proceed the setting to Other Settings with V.Networks Setup Tool. Only then turn on the power
for a second one and go on to Other Settings with V.Networks Setup Tool. Repeat the proce-
dure for the other cameras. Refer to the PDF instruction manual inside the supplied CD-ROM.
22
Select whether to use DHCP.
Change the IP address to the one alloted,
or approved, by the network administrator.
Set the subnet mask to an appropriate
value according to the operating environ-
ment. Ask the network administrator if nec-
essary.
Click
[V.Networks ID] works as an identifica-
tion code set to VN-C11. Only alphanu-
meric characters can be used. This ID
does not directly affect the operation by
the user. Normally, the ID should be set
as "CAM00001," "CAM00002" etc.
(0 to 8 characters)
Click
Note
A new IP address becomes effective
when VN-C11 is automatically reset.
☞
Page 23)
Note
● With DHCP selected, the IP ad-
dress of the DHCP server etc. can
be checked.
.
to update the values.