Relieving Hydraulic Pressure - Chrysler Crossfire 2007 Owner's Manual

212 WHAT TO DO IN EMERGENCIES

Relieving Hydraulic Pressure

NOTE: The hydraulic pressure must be relieved before
the top can manually be raised or lowered.
1. Turn the ignition to the "ON" position.
2. Push down on the convertible top switch and hold in
that position.
3. Turn the ignition "OFF" and continue to push down
on the switch for 5 seconds.
4. After 5 seconds the hydraulic system pressure will be
relieved.
WARNING!
It is important that a second person assist you to close
the convertible top manually to prevent injuries.
1. Lower the windows and open the doors.
2. Turn the ignition key off.
Ensure that the decklid is closed while raising the
convertible top manually to prevent the possibility of
contact between the decklid and the tonneau cover.
Do not place your hands near the convertible top
frame, upper windshield area, or the convertible top
storage compartment while the convertible top is
being raised and locked. Serious personal injury may
occur.
3. Unlock the storage compartment by placing the tool
on the bolt between the backrest and the tonneau cover.
Turn the wrench in the direction of the arrow to its stop
and remove the tool.
I n f o r ma t i o n P r o v i d e d b y :
CAUTION!
WARNING!