Table of Contents
Advertisement
Adjusting Image
Adjusting Images
(continued)
TK-C215V12 (continued)
Registering alarm position
For registering the angle of view during
monitoring when there is an alarm input.
4.
2.,3.
1.,5.
1.
Check that the [ALARM POSITION]
indicator light is turned on.
Registration of alarm position is enabled.
● Press the [POSITION SELECT] button if the
[ALARM POSITION] indicator light is off.
2.
Adjust the image size. (A pg. 25)
3.
Press the [MEMORY] button for 2 seconds
or longer.
The [ALARM POSITION] indicator light blinks
for 3 times (green)
ALARM position registration is completed
4.
Adjust the brightness. (A pg. 25)
5.
Press the [POSITION SELECT] button.
The camera returns to the home position
NOTE:
● Be sure to return the camera to the home
position after registration of the alarm position
is completed.
In addition to pressing the [POSITION
SELECT] button, you can also use the power
ON/OFF button to return the camera to the
home position.
● To check images at the registered home
position or alarm position, press the
[POSITION SELECT] button. Press this
button to switch between the image at the
home and alarm positions.
26
8
7
6
5
4
4
3
2
2
1
Advertisement
Table of Contents
