3-Alarm Detection Settings - Sentry SE series Manual

SE Series DVR Manual
Record Set – Schedule Record
Within a 24 hour period, the user can adjust each channel's frame rate by record mode such as schedule, motion
detection, and alarm record. Press the button to select different record modes or click the left mouse button.

3-Alarm Detection Settings

Alarm Duration – Select off, # of seconds or continuous.
Alarm POP UP Setup – Set to off, # of seconds or continuous. When an alarm is triggered, the alarm symbols is
displayed on the corresponding video channel and goes full screen or to quad screen if more than two alarms are
triggered at the same time.
Alarm Detection – Each Alarm input can be defined as NO (Normally Open) or NC (Normally Closed). Main Menu –
14