6-Audio Settings; 7-Security Protection Settings - Sentry SE series Manual

SE Series DVR Manual

6-Audio Settings

Audio Record – turn on or off as required with left mouse click or Enter button
Mute – must be off to record or playback audio
Input Volume – adjust slide switch with mouse or Enter button to adjust volume of audio being recorded
Output Volume – adjust slide switch with mouse or Enter button to adjust volume of audio being played back

7-Security Protection Settings

The default password is 111111.
1 - Select "Security Protection" from the "System Setup" menu and then select "Password Change"
2 - Enter the current password followed by "Enter"
3 - Enter the new password followed by "Enter"
4 - Confirm (re-enter) the new password followed by "Enter"
Menu Protection - Set to "On" to only allow menus to be accessible by first entering the system password.
This is an excellent way to prevent unauthorized people from changing or deleting recordings
Auto Key Lock - Set to "Off" or for a length of time from 1 to 60 seconds. When a time is set, the system is locked to all
commands and choices within the time set, after selection or booting and can only be unlocked by entering the
password using the keys on the front of the system. It is advisable to leave this command set to "Off" until the user is
very familiar with the system controls.
(Main Menu – System Setup – Security Protection)
To change the password:
17