Sentry SE series Manual page 27

SE Series DVR Manual
Time Search: Selecting Time Search allows the Start and End times of a recording to be defined by date and time, and
the resulting recordings played back. Follow the instructions below to perform a Time Search:
Press ENTER/Click to select date and time. Use the left and right buttons to select an item, press the ENTER button
and use the + / - buttons to change the corresponding value.
After the required date and time have been entered, move the selection to the Search button (bottom left of the screen)
and then press ENTER/Click to start playback.
Forward play speed can be increased: x 2 / x 3 / x 4 using the right arrow button
Reverse play speed can be increased: x 8 / x 16 / x 32 using the left arrow button
27