Table of Contents
Advertisement
02 Locks and alarm
Remote key and key blade
PCC (two batteries)
1. Use a screwdriver to pry out the old bat-
02
teries.
2. Insert the first new battery with the (+)
side upward.
3. Insert the plastic spacer over the battery.
Insert the second new battery on top of
the plastic spacer, with the + side down-
ward.
Re-assembling the remote key
1. Press the remote key's cover into place.
2. Hold the remote key with the slot for the
key blade up.
3. Carefully slide the key blade into its
groove.
4. Gently press the key blade in the groove
until it clicks into place.
Old batteries should be properly recycled.
62
Advertisement
Table of Contents
