Table of Contents
Advertisement
09 Maintenance and specifications
Replacing bulbs
09
Low beam, Halogen
1. Remove the headlight housing from the
vehicle (see page 326).
2. Remove the cover over the bulbs (see
page 327).
3. Unplug the connector from the bulb.
4. Remove the bulb by pressing the holder
downward.
5. Press the new bulb into the socket until it
snaps into place. It can only be secured
in one position.
6. Put the cover back into position and rein-
stall the headlight housing.
Models with optional Active Bending Lights only.
1
328
High beam, Halogen
1. Remove the headlight housing from the
vehicle (see page 326).
2. Remove the cover over the bulbs (see
page 327).
3. Remove the bulb by turning it counter-
clockwise and pulling it straight out.
4. Remove the connector from the bulb.
5. Press the new bulb into the socket and
turn it clockwise to put it in place. It can
only be secured in one position.
6. Reinsert the bulb holder into the headlight
housing.
7. Put the cover back into position and rein-
stall the headlight housing.
1
Extra high beam
1. Remove the headlight housing from the
vehicle (see page 326).
2. Remove the cover over the bulbs (see
page 327).
3. Remove the bulb by pressing the holder
downward.
4. Remove the connector from the bulb.
5. Insert a new bulb in the connector until it
snaps in place. It can only be inserted in
one way.
6. Return the bulb holder into position in the
headlight housing.
7. Put the cover back into position and rein-
stall the headlight housing.
Advertisement
Table of Contents
