Table of Contents
Advertisement
Front side marker lights
1. Remove the headlight housing from the
vehicle.
2. Remove the small round cover over the
bulbs.
3. Pull the wire to withdraw the bulb holder.
4. Pull out the burned out bulb and press a
new bulb into the socket. It can only be
secured in one position.
5. Press the bulb holder into the socket and
press until it clicks into place.
6. Press the cover in place until it clicks into
position.
09 Maintenance and specifications
Turn signals
1. Remove the headlight housing from the
vehicle (see page 326).
2. Remove the round cover by pulling the
tab until the cover comes off.
3. Pull out the holder to access the bulb.
4. Pull out the burned out bulb and press a
new bulb into the socket. It can only be
secured in one position.
5. Press the bulb holder into the socket and
press until it clicks into place.
6. Press the cover in place until it clicks into
position.
7. Reinstall the headlight housing.
Replacing bulbs
Side marker lights
NOTE
Before starting to replace a bulb, see
page 326.
1. Remove the headlight housing from the
vehicle (see page 326).
2. Remove the round cover.
3. Pull the wire to withdraw the bulb holder.
4. Pull out the burned out bulb and install a
new one. It can only be secured in one
position.
5. Press the bulb holder into the socket and
press until it clicks into place.
09
329
Advertisement
Table of Contents
