Table of Contents
Advertisement
Names of parts and their functions (continued)
Menu control section
1 MENU switch
[ON]
The menu is displayed on the screen.
Select a menu item with the CURSOR button 2.
[OFF]
The menu is not displayed.
Menu settings will be stored in memory when this
switch is set to [OFF]. When you finish menu
setting, be sure to set this button to [OFF] before
turning the power off.
The menu of this unit consists of three screens of PAGE 1 to 3.
MENU-PAGE 1
[AUXILIARY] menu
Functions of selected items are described below.
Selected items
MESSAGE
The message input with MESSAGE EDIT in
the [START] menu on MENU-PAGE 3 is shown
in the upper left corner of the screen.
GAIN/SHUT
The GAIN value and SHUTTER value are
shown in the upper left corner of the screen.
OFF
No indication
W. B. NAME
"AUTO WHITE BALANCE", "MANUAL WHITE
BALANCE", "PRESET 3200K", "PRESET
5600K" or the setting made by a technician are
shown when the [WHITE BALANCE] switch or
the [PRESET W. B.] menu is used.
[PRESET W. B.] menu
Use to select one of the preset white balance settings
(3200K, 5600K, or custom setting preset by a techni-
cian).
When the [WHITE BALANCE] switch is set to [PRE-
SET], use the [LEFT]/[RIGHT] button to select 3200K,
5600K, or the custom preset value. Select 3200K or
5600K with the [3200K/5600K] switch.
18
MENU
ON
OFF
Functions
2 CURSOR button
• The mark ( • ) on the left of the menu item indicates that
the item is selected.
• An up arrow ( ) or down arrow ( ) on the left of a
menu item indicates that items can be selected with
the [UP]/[DOWN] CURSOR buttons 2.
• A right arrow ( ) or left arrow ( ) on the right of a
menu item indicates that items can be selected with
the [LEFT]/[RIGHT] CURSOR buttons 2.
[GAMMA] menu
Select a gamma correction value or no gamma correc-
tion.
Selected items
Gamma
0.45
0.48
OFF
No gamma correction ( = 1.0)
[APERTURE] menu
Select the contour compensation value or no contour
compensation.
The leftmost setting on the minus side is for no contour
compensation. Compensation values are selectable in 8
steps.
[M. BLACK] menu
Select the master black (setup) value.
4 steps in the
direction (about 2% shift/step) with the
center value standing for no setup.
[EEI] menu
Select whether or not to use the 1/30-sec. shutter speed
when automatic sensitivity compensation (ALC+EEI) is
used.
Selected items
Shutter speeds
1/30
1/30 sec. is used.
1/60
1/30 sec. is not used.
[PAGE] menu
Switch menu PAGE 1 to PAGE 3 with the CURSOR
[LEFT]/[RIGHT] buttons.
MENU
ON
OFF
= 0.45
= 0.48
Advertisement
Table of Contents
