Dialup Settings - Escient FireBall MP-150 User Manual

PAGE 51

Dialup Settings

If you are going to use a dialup ISP to connect your FireBall to the
Internet, you must provide information for your selected ISP. This
information can be obtained by contacting your ISP or from your
PC, if you already use it to connect to the Internet.
Connect you phone line to a Hayes compatible modem
and connect the modem to COM PORT 4 on the back of
your FireBall, then follow these steps to specify your
Dialup Modem settings:
1. Press the SETUP key on the remote to display the
Setup menu.
2. Select the NETWORK Menu
3. Select the DIALUP SETTINGS Menu
4. Enter your login or user name.
5. Enter your password.
6. Enter 1 or 2 dialup access numbers obtained from
your ISP.
7. Select your dialing method: Tone or Pulse.
8. Enter any required dialing prefixes you may need for
your phone system such as '9' to get an outside line.
9. If you have Call Waiting service on your phone
line, you should enter "*70," (or any other code)
to temporarily disable it while using FireBall. This
prevents a Call Waiting call from interrupting any
FireBall Internet functions that may be in progress,
such as updating.
10. Finally select which Provider you are using: AOL,
CompuServe or Other.
If you want to test the dialup modem connection, select the TEST
CONNECTION button to run the test as described above.