PAGE 60
Calibrating Your Touch Panel
Before you can use your ETP-1500, the touch points of the screen
must be calibrated.
Follow these steps to calibrate your ETP-1500 Touch
Panel:
1. Press the SETUP key on the remote to display the
Setup menu.
2. Select the EXTERNAL CONTROL menu.
3. Select the CALIBRATE TOUCH PANEL menu.
4. Using your finger, touch the circular target on the
ETP-1500. When the touch panel is calibrated, the
SAVE button is highlighted.
5. Touch the SAVE button to save the current
calibration settings and return to the previous
screen.