Sub-Zero UC-24C User Manual page 10

Undercounter Use & Care
Freezer Storage
MODEL UC-24CI
Model UC-24CI refrigerator/freezer features an automatic
ice maker with clear ice container.
The ice container is removed by pulling it straight out.
Reinstall using the reverse process.
ICE MAKER OPERATION
The ice maker of model UC-24CI is fully automatic and
has been tested at the factory.
The level of ice in the ice container is controlled by an ice
level arm. When the container is filled with ice, the ice
level arm senses the level and shuts off the ice maker. As
ice is used, the level drops and the ice level arm signals
the ice maker to restore ice production.
To shut off the ice maker, lift the ice level arm up or to the
off position.
ICE PRODUCTION
The ice maker is designed to produce enough ice for
normal family use. The timing of ice making cycles will
vary depending on load conditions, door openings and
room temperature. On average, you can expect a cycle of
ice (eight cubes per cycle) every two hours until the
container is full.
The ice maker operates on water pressure of 20 psi
to 100 psi
(1.4 bar) (6.9 bar)
osmosis water filter system may not be able to maintain
the minimum pressure.
Dispose of the first bucket of ice produced by your new
unit to ensure that pipe residue or other particles associ-
ated with new water lines are not consumed.
IMPORTANT NOTE: If ice is not used regularly it tends to
fuse together. To avoid this, empty and replace the ice in
the container as needed.
. In some cases, a reverse
10