Self-Diagnostics Results Of The Camera Internal Boards - Sony CCU-790 Operation Manual

Gen Lock: Locking status
CCU Power: CCU power supply type (AC/DC) and power
supply status
BATT Volt: Voltage of the coin battery supplied with the
AT board
PLL Volt: Status of the PLL circuit of the AT board
CCU Mode: Operation mode of the CCU
PLD: Status of the PLD mounted on the AT board and
program version of the PLD
Board ID: ID number of the AT board
AU board
MIC: Audio embedding for the main SDI video signal.
FRONT-INCOM: Settings of the front intercom
INCOM: Channel setting for the intercom made on the
video camera
PGM: Program audio setting
AudioPLL: PLL status of the audio signal
Power: AU board power supply status
CN: CN board power supply status
PLD: Status of the PLD mounted on the AU board and
program version of the PLD
Board ID: ID number of the AU board
IV board
RETURN: Input settings for the return channels 1 to 4
MIX-Y: Setting for camera signal to be mixed with the
return signal
Power: IV board power supply status
DIF: Power status of the DIF board connected to the rear
of the IV board
PLD: Status of the PLD mounted on the IV board and
program version of the PLD
14
Self-Diagnostics
BoardID: ID number of the IV board
EN board
Component: Setting status of the component output signal
from the OUTPUT connector and status of the sync
signal added to the component Y/G output signal from
the OUTPUT connector
Composite: Setting status of the composite output signal
from the OUTPUT connector
Power: EN board power supply status
VDA: Power supply status of the VDA board on the rear
SC-REF: Lock status to the subcarrier of the external
reference signal
PLD: Status of the PLD mounted on the EN board and
program version of the PLD
BoardID: ID number of the EN board
Self-diagnostics results of the
camera internal boards