Table of Contents
Advertisement
Changing the input signal
The input source for picture signals can be changed by
pressing the INPUT Buttons on the projector operating panel
or on the remote control unit.
INPUT
(LCD Projector)
R G B
Y P
P
B
R
S - V I D E O
V I D E O
Previous
screen
INPUT
or
(Remote
Control unit)
The signal from the source which is
connected to the RGB/YP
is projected.
This terminal accepts input of RGB input
signals from a personal computer and DTV
Format signals (RGB, YP
or a digital broadcast. No monitor or
projector can automatically decide whether
a Component signal is the RGB-type or the
YP
B
either RGB or YP
The signal from the source which is
connected to the S-VIDEO IN connector or
VIDEO IN connector is projected.If cables
are connected to both connectors, the S-
VIDEO signal will be selected
automatically. (The S-VIDEO signal has
priority.) If you would like to project the
VIDEO signals being input to the VIDEO
IN connector, do not connect any cables to
the S-VIDEO IN connector.
Continued on the next page...
Press the INPUT Buttons
P
-type.
So, you will have to select
R
B
P
IN connector
B
R
P
) from a DVD
B
R
P
manually.
R
39
Advertisement
Table of Contents
