1. TILT/SWIVEL REMOVAL
(1) Remove two screws (a).
(2) Remove the Tilt/swivel.
3. METAL REAR ASSEMBLY REMOVAL
(1) Remove eight screws (a).
(2) Remove the Metal rear Ass'y.
DISASSEMBLY
(a)
(a)
(a)
(a)
(a)
(a)
(a)
(a)
(a)
2. BACK COVER REMOVAL
(1) Remove four sheet (a) from Back Cover.
(2) Remove four screws (b) from the Back Cover.
(3) Remove the Back Cover.
4. CONTROL, MAIN PCB ASSEMBLY
REMOVAL
(1) Disconnect J2, J4 and J10.
(2) Remove four screws (a).
(3) Remove the Main PCB Ass'y.
(4) Remove three screws (b).
(5) Remove the Control PCB Ass'y.
Back Cover
(b)
(b)
(a)
J2
J4
J10
(a)
(a)
(a)
(a)
(b)
(b)
(b)
(a)