FRONT VIEW
OSD Button
1. Power ON/OFF Button
Use this button to turn the monitor on or off.
2. Power Indicator
This indicator lights up green when the monitor
operates normally; in DPMS (Energy Saving) mode,
- stand-by, suspend, or power off mode - its color
changes to orange.
3.
Button
Use these buttons to choose or adjust items in the on screen
display.
<Shortcut Keys>
• Brightness and Contrast can be adjusted directly
without entering the On Screen Display (OSD)
100
system. Touch the
100
settings and then the OSD button to save all
changes. The Brightness and Contrast functions are
also available in the On Screen Display (OSD) menu.
OPERATING INSTRUCTIONS
Power Button
Power Indicator
AUTO/SET Button
Buttons
Front Control Panel
5
3
buttons to adjust the
REAR VIEW
DC Power Connecter
-
+
4
1
4 AUTO/SET Button
Use this button to enter a selection in the on screen display.
* AUTO adjustment function
P R O C E S S I N G
Touch the AUTO/SET button before using OSD menu.
A U T O C O N F I G U R A T I O N
This button is for the automatic adjustment of the
screen position, clock and phase.
Note: Some signal from some graphics boards may
not function properly. If the results are
unsatisfactory, adjust your monitor's Position, Clock
and Phase manually.
5. OSD Button
Use this button to enter or exit the on screen display.
D-Sub Signal
Connector
2