Microsoft Wireless Mouse Getting Started Manual page 6

Test the Mouse
5
Try using the mouse. If it does not work as expected, make sure the following
procedures were completed as specified earlier in these instructions:
New batteries were inserted correctly.
The receiver was properly connected to the computer.
The receiver and mouse were properly positioned.
If the mouse is still not working, try changing the channel. Changing the wireless
connection channel is useful if you are experiencing interference.
To change the wireless connection channel
Press the button on the bottom of the wireless mouse.
If changing the channel does not solve the problem, you may need to reconnect the
mouse to the receiver.
To reconnect the mouse to the receiver
1. Make sure that the mouse and receiver are positioned as specified earlier in
these instructions.
2. Press the button on the top of the wireless receiver. The receiver light blinks to
indicate that it is in "connect" mode.
3. Press the button on the bottom of the mouse.
If reconnecting the mouse to the receiver does not solve the problem, refer to the
User's Guide installed with IntelliPoint software.
Important Before using this product, read about the potential for radio
interference in the topic titled "Radio and TV interference regulations" in the User's
Guide installed with IntelliPoint software.
4