Insert The Batteries - Microsoft Wireless Mouse Getting Started Manual

If your mouse has a Universal Serial Bus (USB) connector, it can be used with a
Macintosh computer.
To install IntelliPoint software (Macintosh)
Insert the Microsoft IntelliPoint compact disc into the computer's CD drive,
double-click the IntelliPoint Installer icon, and then follow the on-screen
instructions. After installation is complete, restart your computer if prompted to
do so.

Insert the Batteries

2
Whenever you insert batteries, always make sure both of them are new. Alkaline
batteries are recommended, and two alkaline batteries are included in the package.
Note To preserve battery life, the mouse automatically enters power saving mode
when not in use, so there is no need for a power switch.
1. Turn the mouse upside down, and then remove the battery compartment cover.
2. Insert the batteries, making sure to properly orient the positive (+) and negative
(–) ends as specified by the battery compartment labels.
3. Close the battery compartment cover.
Important Before boarding any aircraft, remove the batteries from the wireless
mouse. The wireless mouse can emit radio frequency (RF) energy, similar to a
cellular telephone, whenever batteries are installed and the mouse is activated
either by touch or button press.
Position the Wireless Mouse and Receiver
3
For optimum performance, position the receiver so that it is at least 8 inches (20
cm) away from the mouse and any items that might cause interference, such as
computer monitors, large metal objects (including metal furniture), desktop fans,
or fluorescent lights. The mouse may work up to 6 feet (1.8 m) away from the
receiver, but this distance varies depending on positioning, nearby items causing
interference, and other factors.
2