IBM Power 720 Express 8202-E4B Installation Manual page 21

Table 3. Tasks to install the factory-racked server (continued)
Task
Cable the system and set up a console, interface, or
terminal.
Connect power cables and apply power.
Installing the IBM Power 720 Express (8202-E4B) and the IBM Power 740 Express (8205-E6B)
Where to find associated information
To cable the system, see Cable the system and set up a
console, interface, or terminal.
For more information, see Completing server setup if
you have an HMC, or Completing server setup if you do
not have an HMC
9