Use to turn on either the side illu-
minations or the back illumination.
With factory setting, when the
power is switched on, the side illu-
minations will come on.
Every time the button is pressed,
the lighting of the unit changes as
side illuminations ON again, and
Use to select the output picture. Choose from camera, EXT INPUT
connector, or picture memory.
Picture from the camera is selected.
The picture input to the EXT INPUT connector
(from a personal computer, for example) is
PICTURE MEMORY: When a picture is stored in memory, it can be
selected as the output picture (refer to "Picture
memory" on page 15).
• The picture input from the EXT INPUT connector cannot be used for
the output to the VIDEO OUTPUT and S-VIDEO OUTPUT
connectors. (See the rear panel on pages 8 and 9)
NEGA/POSI BW/COLOR TEXT MODE
BW/COLOR: Changes a color picture into
TEXT MODE: Makes characters clearer and
Reverse the colors and bright-
ness of a picture.
Reverses negative film images
to enable normal color picture
(In the NEGATIVE mode, set-
tings are for the negative film.)
B/W. If used when showing
B/W material, definition of the
picture will improve.
sharper. Use to show text ma-
terial for effective presentation.
Use to adjust the focus of the camera picture.
AUTO: When this button is pressed for
NEAR: Press this button to reduce the focal
• Press the AUTO button to exit the menu
Use to perform camera
adjustments and setting
on the on-screen dis-
(Refer to "Menu adjust-
ment" on page 10.)
DIGIT AL PRESENTER AV-P950
automatic focusing of an image, the
indicator starts blinking. As soon as
focusing is achieved the indicator will
length (to focus on a point closer to the
Press this button to increase the focal
length (to focus on a point further from