Presentation (Basic); Printed Material And 3-Dimensional Objects; Slide Presentation - JVC AV-P950U Instructions Manual

PRESENTATION (BASIC)

Printed material and 3-dimensional objects

1.
1
Adjust the position and direction
tion lamps so that the stage receives uniform lighting.
2.
Place an object on the white back illumination area of the
stage.
3.
Adjust the picture size with the ZOOM buttons
checking the screen.
4.
When the picture size is determined, adjust the focus with
1
the FOCUS buttons .
• It is recommended to turn on the side illumination lamps.
• Set the picture mode for the RGB output according to the
specifications of the connected projector or display (see
page 8).
• It is recommended to use the preview mode when you do
not want to show changes of presentation objects or pic-
ture adjustments on the main screen (RGB output) (see
page 14).

Slide presentation

1.
1
Adjust the position and direction
tion lamps so that the stage receives uniform lighting.
2.
Insert the film into the slide film holder in the direction shown
6
.
3.
Adjust the size of the picture with the ZOOM OUT button
3
.
4.
When the picture size is determined, adjust the focus with
4
the FOCUS buttons .
5.
Adjust the screen brightness with the BRIGHTNESS but-
5
tons .
• Magnifying the slide film (vertical) until the mount section
can no longer be seen makes focusing impossible. Press
the ZOOM OUT button for adjustment.
• Do not place any other materials on the stage because
they will block the reflected light from the side illumination
lamps.
• Use regular plastic slide mounts.
12
2
of the side illumina-
3
while
2
of the side illumina-
1
2
5
BRIGHTNESS
AUTO DARKER BRIGHTER
FOCUS
AUTO NEAR FAR
OFF
4
Slide film holder
1
2
ZOOM PRESET
AUTO WHITE
SET
A4/LETTER A5
ZOOM
ON
OUT IN
3
6
Mount
Slide film