Honeywell T7200D Product Data page 17

T7200D,E, T7300D,E,F AND Q7300 SERIES 2000 PROGRAMMABLE COMMERCIAL THERMOSTATS AND SUBBASES
Table 11. Occupied and Unoccupied Periods Start Times.
Occupied Unoccupied
Day Period 1 Period 1
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
The program has four temperature settings, Occupied and
Unoccupied heat and cool. The thermostat will operate at the
Occupied temperature setting unless the thermostat is
programmed. Table 12 shows the default temperature settings.
Table 12. Occupied and Unoccupied
Default Temperature Settings.
Control Occupied
Heating 70°F (20°C)
Cooling 78°F (25.5°C)
Setting Current Day/Time
1. Press Set Current Day/Time.
NOTE: On initial power up or after an extended
power loss, 1:00 pm flashes on the display
until a key is pressed.
Set Current
Set Program Set Temperature
Day/Time
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System
2. Press Day until the current day is displayed.
NOTE: Sun = Sunday, Mon = Monday, Tue = Tuesday,
Wed = Wednesday, Thu = Thursday, Fri =
Friday, Sat = Saturday.
Day
Set Program Set Temperature Change
Time/Temp
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan
Occupied Unoccupied
Period 2 Period 2
Unoccupied
55°F (13°C)
90°F (32°C)
Set Day/Time
PM
Change
Time/Temp
Mon
Fan
M4951B
Set Day/Time
PM
Tue
M4952B
3. Press increase
time is displayed.
NOTE: Tapping the Set Current Day/Time will change
the time in one hour increments.
Set Program Set Temperature
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System
4. Press Run Program.
Run
Program
Set Program
Run Occupied Unoccupied Occupied
Program Start Time Start Time Day Temp
Temporary Set Current Clear
Occupied Day/Time Start Time Copy
Continous
Unoccupied
Setting Program Times
1. Press Occupied Start Time.
NOTE: Anytime a start time is not required, press the
Clear Start Time.
Occupied
Start Time
Set Program
Run Occupied Unoccupied
Program Start Time Start Time Day
Temporary Set Current Clear
Occupied Day/Time Start Time Copy
Continous
Unoccupied
2. Press Day until the desired day is displayed.
Occupied
Start Time
Set Program
Run Occupied Unoccupied
Program Start Time Start Time Day
Temporary Set Current Clear
Occupied Day/Time Start Time Copy
Continous
Unoccupied
3. Press increase
start time is displayed.
NOTE: The program times are in fifteen minute
intervals. (Example: 8:00, 8:15, 8:30).
Set Program Set Temperature
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System
4. Press Occupied Start Time a second time to set a
second Occupied Start Time.
Occupied
Start Time
Set Program
Run Occupied Unoccupied
Program Start Time Start Time Day
Temporary Set Current Clear
Occupied Day/Time Start Time Copy
Continous
Unoccupied
17
or decrease key until the current
Set Day/Time
PM
Change
Time/Temp
Temp
Tue
Fan
M4953B
AM
Room
Set Temperature Change
Time/Temp
Unoccupied
Temp
Mon
Occupied 1
Heat/Cool
Settings
System Fan
System Fan
Heat Auto
M4954A
Set Program
Start Time
AM
Set Temperature Change
Time/Temp
Occupied Unoccupied
Temp Temp Mon
Occupied 1
Heat/Cool
Settings
System Fan
M4955A
Set Program
Start Time
AM
Set Temperature Change
Time/Temp
Occupied Unoccupied
Temp Temp Mon
Occupied 1
Heat/Cool
Settings
System Fan
M4955A
or decrease key until the desired
Set ProgramStart Time
AM
Change
Time/Temp
Wed
Occupied 1
Fan
M4957A
Set ProgramStart Time
Set Temperature Change
Time/Temp
Occupied Unoccupied
Temp Temp
Wed
Heat/Cool Occupied 2
Settings
System Fan
M4958B
63-4355—1