CITROEN 2001 BERLINGO Handbook page 291

AXLE GEOMETRY
XSARA PICASSO - All Types
Measurements at reference height (continued)
NOTE : To make the setting of reference height easier, it is acceptable to take the measurement from the flange of the jacking point.
WARNING : The values shown should only be used as guides. In case of doubt, check the settings at reference height (See page 286)
Front height Rear height
B3CP05BC H1' = Measurement from the jacking point.
B3CP058D B3DP079C
L1' = R1 – H1'
L2 = R2 – H2
Compress the suspension to obtain the calculated values.
Engines 1.6i – 1.8i 16 V – 2.0 HDi
L1 90.5 mm
L1' 124 mm
287