Clutch Disengagement Phase; Engagement / Adjustment Phase - CITROEN 2001 BERLINGO Handbook

XSARA - XSARA PICASSO
B2BP03QD
Operation
For the adjusting device to operate correctly, it
is necessary that :
The pedal is at rest (against its upper stop) The
locking sleeve (1) is slightly compressed, the
rollers (2) are free, the outer cable (3) length
may vary.
NOTE : The pedal gear has a non-adjustable assisting device.
CLUTCH : CHECKS AND ADJUSTMENTS
Engines : LFX - LFY - RFS - RFV - WJZ - RHY (continued)

Clutch disengagement phase

As soon as the pedal is applied, the attaching
end-piece (4) leaves the sleeve (1) which
moves back. The rollers, pushed by spring (5)
jam the system. The cable behaves like a
conventional cable.
216

Engagement / adjustment phase

The pedal returns to rest on its upper
stop.Attaching end-piece (4) pushes sleeve (1)
which frees the rollers.
Outer cable (3), kept extended by the spring (6)
becomes :
- Shorter if the clutch disc is worn.
- Longer if the outer cable has been compressed.