CHECKING AND SETTING THE VALVE TIMING
- [1] HM screw
- [2] Locating peg Ø 6 mm
- [3] Flywheel locating peg
- [4] Toothed sector for locking the flywheel
- [5] Belt retaining clip
- [6] Square drive for adjusting the tension
- [7] Belt tension measuring instrument
- [8] Toothed sector for locking the flywheel
- Peg the flywheel using tool [3].
- Visually check that the offset between the camshaft and injection pump hub holes, and the corresponding peg-
ging holes do not exceed 1 mm.
B1CP045C
Engine : WJZ
TOOLS
: (-) 0 188 E
: (-) 0 188 H
: (-) 0 188 D ( ou 7014-T.J)
: (-) 0 188 F
: (-) 0 188 K
: (-) 0 188 J
: 4122-T
: 6016-T
Checking the valve timing
127
Tool kit (-) 0 188.