Advanced Control Of Osd - Philips 150b Service Manual

http://jdwxzlw.com/?fromuser=华盛维修
Front control panel
To Lock/Unlock OSD function
The OSD function can be locked by pressing
10 seconds, the screen shows following windows for 3 seconds.
Everytime when you press or
on the screen automatically. The
(mute) hotkey are still functional for brightness and mute expectively
while OSD locked
ATTENTION
OSD MAIN CONTROLS LOCKED
Locked OSD function can be released by pressing
more than 10 seconds. While press
purpose, the screen will keep showing "OSD MAIN MENU LOCKED"
until OSD function unlocked and screen automatically shows
following window for 3 seconds.
ATTENTION
OSD MAIN MENU UNLOCK
Switch ON/OFF attention signals
All attention signals can be switched off by keep pressing
for more than 10 seconds if there is no video signal supplied.
ATTENTION
ATTENTION SIGNAL OFF
Back
家电维修资料网，免费下载各种维修资料

Advanced control of OSD

button for more than
button, this message appears
& (brightness) , &
button for
button for OSD unlocked
button
Recover attention signals by pressing
seconds without video signal input.
ATTENTION
ATTENTION SIGNAL ON
Access Service Mode
Operating monitor with no signals (power saving mode), keep
pressing button for more than 10 seconds. Following information
will appear on the screen. Leave service mode by either re-feed
video signal or simply turn off and on the power of monitor.
SERVICE MODE
SERIAL NO.: TY 123456
HOURS OF OPERATION: 000103
Access Factory Mode
To hold and buttons then power on the monitor. Press
bring up OSD menu for confirmation as below:
HUDSON 150B V1.00 2001-02-13
WILD V0.18 2000-05-25
In the factory mode, once video signal removed, a full white pattern
will be display on the screen as Fig.1 in stead of power saving mode.
In other words, the power saving function will be disable in the factory
mode.
NO VIDEO INPUT
AGING...
Fig.1
Leave factory mode by simply power off the monitor.
Hudson 150B
7
Go to cover page
button for more than 10
to
Forward