monitoring a single channel
You can monitor a single channel with your
scanner by navigating to that channel while in
manual mode. The scanner will receive traffi c on
the selected frequency.
deleting frequencies from channels
1. Press MAN.
2. Use the number keys to enter the channel
with the frequency you want to delete.
3. Press MAN again.
4. Press PROG to enter the program mode. MAN
changes to PGM.
5. Press FUNC.
6. Press CLEAR. The frequency number changes
and 0.0000 appears.
listening to the marine bank
To listen to the marine bank, press MAR. MAr
appears for about 2 seconds, then the scanner
starts searching from marine channel 16.
To stop searching the channels, press PAUSE. SRCH
disappears and MAN appears.
To change the channel manually, press or .
To search through the marine bank again, press
PAUSE. MAN disappears and SRCH appears. To
change the searching direction, press or .
You can select a marine channel directly. When
the scanner stops searching the marine bank, use
the number keys to enter the two-digit channel
number.
Beyond the Basics
33