Attaching The Antenna; Powering On/Off (On-Off/End/Home Key); Powering On (Emergency Button); Powering On With Transmit Inhibit (Txi) Active - Motorola MTP850 Basic User's Manual

Attaching the Antenna

Turn the MTP850 Off before installing or removing the antenna.
Insert the bottom of the antenna into the screw-in base on the top of
the MTP850. Turn clockwise until snug. Do not force.

Powering On/Off (On-Off/End/Home Key)

To power On, press and hold
check and registration routine. After successful registration, the
MTP850 is in service.
To power Off, press and hold
Powering Off message is displayed.

Powering On (Emergency Button)

Press and hold the Emergency button to power On. The MTP850
will power On in Emergency Mode or in standard mode (as
programmed).

Powering On with Transmit Inhibit (TXI) Active

Transmit Inhibit is a feature allowing you to switch off transmission
before entering a Radio-Frequency (RF) sensitive area. To activate
this feature, press
Mode > Activate.
Pressing the Emergency button, even if Transmit Inhibit is activated,
! !
causes the MTP850 to transmit immediately. The MTP850 must NOT be
within the RF sensitive area when entering Emergency Mode.
W A R N I N G
22
. Your MTP850 performs a self-
. You will hear a beep and the
and select More...> Networks > TXI
MENU