Turning The Radio On Or Off; Adjusting The Radio's Volume; Selecting A Radio Channel - Motorola P040 User Manual

TURNING THE RADIO ON OR OFF

ON
1. Turn the On-Off/Volume Control knob
clockwise to turn on the radio. You will hear
the Self Test Pass Tone (
see a green LED if the radio powers up suc-
cessfully. If the radio fails its self test, you will
hear the Self Test Fail Tone (
Switch off and on again and if fault persists
contact your dealer.
2. To turn off the radio, turn the On-Off/Volume
Control knob counter-clockwise, until you
hear a click.
English 12

ADJUSTING THE RADIO'S VOLUME

If one of the radio side buttons has been
programmed as a Volume Set button by your
dealer, it may be used as follows:
1. Press and hold the preprogrammed Volume
Set button; you will hear a continuous tone.
2. Turn the On-Off/Volume Control knob and
adjust the volume level.
OFF
3. Release the preprogrammed Volume Set
button.

SELECTING A RADIO CHANNEL

Your radio offers 4 channels for easy access to
) and
required conventional channels. Some channels on
your radio may not be programmed. Check with
your dealer for more information.
).
Turn the Channel Selector knob clockwise or
counter-clockwise until you reach the desired
channel.