Basic Operations - JVC KD-SH77 Instructions Manual

2
1
1
Turn on the power and select the
source.
When you press the button
for the first time, the power
comes on. Then each time
you press the button, the
source changes as follows.
For KD-SH77
FM TUNER CD PLAY
or
AM TUNER
AUX INPUT
For KD-SH55
FM TUNER CD PLAY
or
AM TUNER
AUX INPUT
* If a CD is not in the loading slot, you cannot
select CD as the source to play.
** Without connecting the CD changer, you
cannot select it as the source to play.
*** ONLY for KD-SH55: To select the external
component, you have to change the external
component setting (see page 20).
To operate the tuner (FM or AM),
see pages 8 – 10.
To operate the CD player,
see pages 11 – 13.
To operate external components
(AUX INPUT and LINE INPUT),
see pages 24 – 25.
To operate the CD changer,
see pages 26 – 27.

BASIC OPERATIONS

2
*
**
CD CHANGER
LINE INPUT
*
**
CD CHANGER
or
***
LINE INPUT
3
To drop the volume in a moment
Press and hold
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press and
hold the button again.
• If you turn the control dial clockwise, you can
To turn off the power
Press and hold SOURCE
appears on the display.
Note:
When you use this unit for
the first time, set the built-in
clock correctly, see page 17.
Adjust the volume.
To increase the volume.
To decrease the volume.
Volume level appears.
Volume level indicator
Note:
After adjusting the volume, you can push in the
control dial to avoid unintended operations.
To use it again, push the control dial again to
make it come out.
Adjust the sound as you want.
(See page 14.)
/ATT while listening to any
also restore the sound.
until "SEE YOU"
7