Table of Contents
Advertisement
USER MANUAL
Electric switch on/switch off the boiler
Switching on: Switch on the fireplace by plugging the
electrical cable into an accessible 1-phase outlet on the wall.
The illuminated display shows that the fireplace is under
voltage. Wait for a few seconds that the system needs to set
up. Afterwards, by the function keys you pass through the
access menu and perform any necessary adjustments.
Switching off: By pressing the button for switching off, the
fireplace goes in the switcing off process. That is the
procedure which, depending on the fireplaces working mode
lasts for a few minutes. After the switcing off process, when
displaying OFF on the display, the fireplace can also be
physicall separated from the electrical power source.
6.6. Putting into operation
Check if the type of pellet described in this manual matches
the type of pellet in your storage. The storage can be filled to
the top with pellet. Refill the storage with pellet when
needed.
Ignition and heating
The fireplace needs to be cleaned of ash and slug.
If an additional temperature regulator has been installed set
the wanted room temperature. All customers who have an
additional temperature regulator should activate it in the
fireplaces menu.
20
www.kovan.ba
Advertisement
Table of Contents
