Table of Contents
Advertisement
USER MANUAL
www.kovan.ba
5.4. Fireplace description
The fireplace is constructed so as to operate with pellet. The
construction of the fireplace is made of steel, carried out by
plate welding. It consists of an inner ardent and outer
protective mantle, a circuit of the torch and pellet storage.
The ardent mantle is made of cooper plates 4 /W4/HII / DIN
17155.
The fireplace is equipped with a ventilator for equal
3
distribution of warm air, with the fluidity of ca 60m
/h. In this
way the warmth is equally distributed in the room where the
fireplace is installed.
The motion of flue gases from the torch rises up in the space
chamber where they cool down exchanging the temperature
with the mantle, and then pressed by another wave of flue
gas move to another space: exchange chamber. The mantle of
the chamber is a barrier around which the flue gases move,
exchanging their temperature, which is at the other side
taken by the ventilator and spread around the room. This
enables the warmth to be most efficiently used before it is
vacuumed into the funnel.
The furnace is constructed as a compact module. An electric
heater is used as an igniter that turns on and off
automatically. The heater is placed close to the electric
turbine. Controlled air supply is carried out by the electric
turbine by regulating the number of rotations of the turbine.
The supply of electrical energy is in accordance with all safety
regulations. The device is supplied with electrical energy per
plug device, that is in the case of fireplace supplied over a
inseparable cable (directly connected to voltage) per breaker.
13
Advertisement
Table of Contents
