Audio - Sony KD-30XS955 Service Manual

Problem
MPEG1 movie does not
play back correctly
MPEG1 quality is poor when
enlarged (page 79)
Error message
is displayed
Error icon is displayed

Audio

Problem
Good picture,
no sound
Cannot gain enough volume
when using a cable box
Sound seems weak or
insufficient
Cannot raise the volume on
external audio speakers
Possible Remedies
❏
Some variations of MPEG1 movies may not be compatible with the
Memory Stick Viewer.
❏
The quality of the movie when enlarged depends on the resolution of the
MPEG1 file. See your camera's instruction manual for details.
❏
No Memory Stick
❏
Memory Stick
Locked
❏
Memory Stick Error
❏
Format Error
Possible Remedies
❏
Press MUTING so that the word
48).
❏
Make sure the Speaker
❏
Make sure the MTS option is set to
❏
Increase the volume of the cable box using the cable box's remote control.
Then press TV FUNCTION
❏
The TV's audio might be set to
to Stereo. In the Audio Menu (see page 97), set the
already set to Stereo,
during weak stereo broadcasts).
❏
Speaker
If the option is set to
order to output the sound to your audio system) use your audio receiver to
adjust the sound (see page 97). Or, to use the TV remote control, set the
Audio Out option to Variable.
❏
To turn on the TV speakers, set the
There is no Memory Stick in the slot.
The lock mechanism on the Memory Stick is
engaged.
The Memory Stick in the slot might be damaged;
try a different Memory Stick.
The Memory Stick may have been formatted using
a PC or other device that is not compatible with
cameras.
The file is not a valid MPEG1 or JPEG format.
The thumbnail is not DCF-compatible.
The file is a JPEG or an MPEG1, but the thumbnail
is unreadable.
The file is unreadable.
Muting disappears from the screen (see page
option is set to On in the Audio Menu (see page 98).
Stereo or Mono
and adjust the TV's volume.
Auto SAP or Mono, when it might be better set
switch to Mono (which may reduce background noise
Off Audio Out
and the
Speaker option to
(see page 97).
MTS setting to Stereo. If
Fixed
option is set to (in
On (see page 97).
117