Sony KD-30XS955 Service Manual page 234

TV
A/V cable
Notes on Using This Connection
To Do This ...
Watch cable (unscrambled)
channels
Watch cable box (scrambled)
channels
Watch the VCR
Set up the TV remote control
to operate the cable box or
VCR
Activate the remote control to
operate the cable box or VCR
Control specific cable box and
VCR functions with the TV
remote control
Label video inputs to easily
identify equipment connected
to the TV
Coaxial
cable
Cable box
A/V cable
Do This ...
Press TV/VIDEO repeatedly to select the cable input (CABLE in the
illustration).
Press TV/VIDEO repeatedly to select the cable box input (VIDEO 3 in the
illustration). Use the cable box to change channels.
Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration).
If you have a non-Sony VCR, you must program the remote control. See
"Programming the Remote Control" on pages 51-52.
For the cable box, press SAT/CABLE
cover, as shown on page 50. Then set the A/V slide switch to the position
you programmed for the VCR.
See "Operating a Cable Box" on page 67 and "Operating a VCR" on page 66.
See the instructions for setting up Video Labels on page 101.
Splitter
(not supplied)
Coaxial
cable
color-coded to connectors.
Coaxial
cable
VCR
FUNCTION. For the VCR, open the outside
CATV
cable
Cables are often
Connect red to red,
white to white, etc.
27