Safety; Safety Alerts; Required Operator Training; Practices And Laws - Ariens 815034 Owner/Operator's Manual & Parts List

DELIVERY
Customer Note: If you have purchased this product
without complete assembly and instruction by your
retailer, it is your responsibility to:
1. Read and understand all assembly instructions in
this manual. If you do not understand or have
difficulty following the instructions, contact your
nearest Ariens/Gravely Dealer for assistance. Make
sure all assembly has been properly completed and
safety interlock system works properly.
NOTE: To locate your nearest Ariens Dealer, go to
www.ariens.com. To locate your nearest Gravely Dealer,
go to www.gravely.com.

SAFETY ALERTS

Look for these symbols to point out
important safety precautions. They mean:
Attention!
Personal Safety Is Involved!
Become Alert!
Obey The Message!
The safety alert symbols above and signal words below
are used on decals and in this manual.
Read and understand all safety messages.
DANGER: IMMINENTLY HAZARDOUS
SITUATION! If not avoided, WILL RESULT in
death or serious injury.
WARNING: POTENTIALLY HAZARDOUS
SITUATION! If not avoided, COULD RESULT in
death or serious injury.
CAUTION: POTENTIALLY HAZARDOUS
SITUATION! If not avoided, MAY RESULT in
minor or moderate injury. It may also be used to
alert against unsafe practices.
NOTATIONS
NOTE: General reference information for proper
operation and maintenance practices.
IMPORTANT: Specific procedures or information
required to prevent damage to unit or attachment.

PRACTICES AND LAWS

Practice usual and customary safe working precautions,
for the benefit of yourself and others. Understand and
follow all safety messages. Be alert to unsafe conditions
and the possibility of minor, moderate, or serious injury or
death. Learn applicable rules and laws in your area.
Always follow the practices set forth in this manual.
WARNING: Improper assembly or adjustments
can cause serious injury.
2. Understand all Safety Precautions provided in the
manuals.
3. Review control functions and operation of the unit.
Do not operate unit unless all controls function as
described in this manual.
4. Review recommended lubrication, maintenance
and adjustments.
5. Fill out a Product Registration Card and return the
card to the Ariens Company or go to
www.ariens.com or www.gravely.com.

SAFETY

REQUIRED OPERATOR TRAINING

Original purchaser of this unit was instructed by the seller
on safe and proper operation. If unit is to be used by
someone other than original purchaser; loaned, rented or
sold, ALWAYS provide this manual and any needed
safety training before operation.
SAFETY DECALS AND LOCATIONS
ALWAYS replace missing or damaged safety decals.
See figure 2 for safety decal locations.
1. HOT SURFACES!
077541
2. DANGER!
GB - 3
DO NOT touch parts which
are hot from operation.
ALWAYS allow parts to cool.
ROTATING PARTS. Stop
engine and remove ignition key
before clearing.