Chute Crank Adjustment - Ariens 815034 Owner/Operator's Manual & Parts List

Headlight
Top Pivot Nut
Bottom Pivot Nut

CHUTE CRANK ADJUSTMENT

(Figure 21)
NOTE: Adjust the chute crank if the chute does not turn
when using the chute crank.
1. Loosen mounting hardware on chute crank bracket.
2. Slide chute crank bracket towards the chute until
the chute crank fits into the chute crank slot as
shown in figure 21.
3. Tighten mounting hardware on chute crank bracket.
Chute Chute Crank
Crank Slot
Chute Crank
Bracket
Figure 20
Chute
Figure 21
CHUTE DEFLECTOR CABLE ADJUSTMENT
(Figure 22)
NOTE: Adjust the chute deflector cables if the chute
deflector does not move up or down properly.
1. Loosen adjustment nuts.
2. Turn adjustment barrel on each chute deflector
cable until chute deflector cables are taunt.
3. Tighten adjustment nuts.
OEe034
CHUTE DEFLECTOR ADJUSTMENT
(Figure 23)
NOTE: Adjust the chute deflector if the chute deflector
does not stay in the selected position.
To adjust, tighten mounting hardware until the chute
deflector holds the selected position.
Chute
Deflector
Slots
OEe035
GB - 21
Adjustment Nut
Adjustment
Adjustment
Nut
Barrel
Figure 22
Mounting
Hardware
Figure 23
Chute
Deflector
Cable
OEe036
OEe037