Storage; Specifications - Ariens 815034 Owner/Operator's Manual & Parts List

WARNING: AVOID INJURY. Read and
understand the entire Safety section before
proceeding.
If the drift cutters are installed, the snow thrower can be
placed in the storage position (figure 24). NEVER place
snow thrower in the storage position without the drift
cutters installed.
IMPORTANT: NEVER spray unit with high-pressure
water. DO NOT store unit outdoors.
Clean plastic surfaces with sponge and mild detergent.
Dry with a soft cloth.
Remove all snow, ice, salt, dirt, grease, etc. from snow
thrower and unit.
Store in a clean, dry area.
Ensure all fasteners are properly tightened. Inspect
moving parts for damage and wear.
Touch up all rusted or chipped painted surfaces.
Model
Serial Number
Clearing Width with Drift Cutter – in. (m)
Clearing Width without Drift Cutter – in. (m)

STORAGE

Storage Position
Only place snow
thrower in the
Storage Position if
the drift cutters
are installed.

SPECIFICATIONS

815034
> 101
46 (1.16)
42 (1.06)
GB - 22
Figure 24
OEe030