Sym GTS 250 Service Manual page 180

Assembly
Fill out the block of bearing by grease.
Drive the left bearing, dust seal and install the dist.
collar.
Install the right side bearing.
Caution
 Carefully install the bearing in correct and
evenly.
 Bearing outer face should be faced up as
bearing installation.
Install the brake disk and then tighten the bolts.
Torque value: 4.0~4.5kgf-m
To this chapter contents
15. Steering / Front Wheel / Front Cushion
Dust seal
Bearing
6201U
Dist collar
Bearing 6201U
Dust seal
15-7