Using The Tuner - JVC RS-WP1WT Instructions Manual

Using the Tuner

TIMER
CLOCK TIMER ON/OFF
STAND BY/ON
SLEEP
DOWN UP SET
PROGRAM
Number keys
RANDOM
AUTO
PRESET REPEAT
AUTO PRESET
TUNER
AUX C D TAPE
BAND
TUNER BAND
FM MODE
4 FF ¢
REVERSE MODE REW MULTI CONTROL
DISPLAY
BASS/
TREBLE
AHB PRO
VOLUME
RM-SRSWP1U REMOTE CONTROL
You can listen to FM and AM stations. Stations can be tuned in
manually, automatically, or from preset memory storage.
I
Before listening to the radio:
• Fully extend the FM telescopic antenna.
One Touch Radio ————————
• This operation is effective only when the System is operated on
AC power or car battery.
Just press the TUNER BAND button to turn on the System and start
playing the station you were last tuned to.
I
You can switch from any other sound source to the radio by
pressing the TUNER BAND button.
Tuning In a Station
1. Press the TUNER BAND button.
The Band and Frequency you were last tuned to appear on the
display.
Each time you press the button, the band and FM mode change
as follows:
FM → FM-MONO → AM → (back to the beginning)
• When you tune in an FM broadcast in FM mode, the
"STEREO" indicator lights up and you can hear stereo
effects. If an FM stereo broadcast is hard to receive or noisy,
select FM-MONO mode. The "STEREO" indicator will go
out. Reception improves, but you lose any stereo effect.
2. Select a station using one of the following
methods.
I
Manual Tuning
Press the 4 or ¢ button repeatedly to move from frequency
to frequency until you find the station you want.
I
Auto Tuning
If you press and hold the 4 or ¢ button for one second or
more, the frequency changes down, or up, automatically until a
station is found.
CD PORTABLE SYSTEM RS-WP1
STANDBY
TUNER BAND
BAND
4
REW
OR
OR
STANDBY/ON
7/(Preset Tuning)
¢
FF
I
Preset Tuning (Possible only after presetting
stations)
Select the desired preset number (displayed as "P-XX" on the
display) using the 7 button on the Unit or the number keys on
the Remote control. After 1 second, the display will show the
preset number's band and frequency.
On the Unit
7 button:
Each time you press the button, the preset
number increases.
On the Remote Control
Number keys: To select P-5, press 5.
To select P-15, press +10 then 5.
To select P-20, press +10 once then press 10.
3. Turn the FM antenna for the best reception.
For an AM broadcast, turn the Unit to obtain the best reception.
Placing the Unit near the window, for example, will improve
AM reception.
Note:
When transporting the System, fold and store the antenna in place
before carrying the System on your back.
Band, Frequency,
STEREO
Preset number
indicator
STEREO
MHz
For FM
CD PORTABLE SYSTEM RS-WP1
STANDBY
STANDBY/ON
BAND
REW FF
For AM
CD PORTABLE SYSTEM RS-WP1
STANDBY
STANDBY/ON
BAND
S
REW FF
9