Holder
Leg Adjust
Shaft Assembly
Cabinet Base
Gasket
Air Braker
Nut
13. Rear Leg Adjustment System
1) Remove 2 screws.
2) Pull the Holder.
3) Pull the Leg Adjust.
4) Pull the Shaft Assembly.
14. Inlet Valve
Inlet Valve
1) You can disassemble the lnlet Valve by
15. Air Braker Assembly
1) Disconnect the 3 hoses assembly.
2) Turn the Air Braker Nut counterclockwise.
Air Braker
Assembly
- 19 -
removing the 2 screws.
Be careful the o-ring should not be lost.