Table of Contents
Advertisement
30
EN
Capturing video in real time
When a camcorder is connected to the PC with a USB cable, the video from the camcorder can be recorded
on the PC's hard drive instead of on tape or in a memory card (real-time capture).
1
Connect the camcorder to the PC with a USB cable.
Refer to "Connections (Windows
Installation and USB Connection Guide.
2
Set the camcorder to the memory card recording mode.
The camcorder is now on.
"
" appears on the camcorder's LCD monitor.
If "
" does not appear, install [USB Video Streaming driver]. Refer to "Software Installation
®
(Windows
)" (
and USB Connection Guide.
NOTE:
The procedure is different when reading or writing a memory card.
3
Select [Start] – [Programs] – [PIXELA] –
[ImageMixer] – [ImageMixer With VCD
Ver.1.1].
For Macintosh, double-click the
[ImageMixer] icon on the PC.
ImageMixer starts up.
4
Click the Input button.
The input mode screen appears.
®
)" (
pg. 5) and "Software Installation (Macintosh)" (
pg. 9) or "Connections (Macintosh)" (
CAPTURING VIDEO
pg. 13) in the Software
pg. 14) in the Software Installation
Input
CONTINUED ON NEXT PAGE
Advertisement
Table of Contents
