Table of Contents
Advertisement
LUBRICANTS & COOLANT SPECIFICATIONS
LUBRICANTS AND COOLANTS:
Lubricants :
Engine oil :
Recommended grade of engine oil confirming to
API-CH4+MB228.3 or higher grade engine oil to be used.
Specification and range of ambient temperature at which these
can be used are given in the table below :
Ambient temp. in deg.C
-5 and above
-20 to 0
Gearbox:
75W90 GL 4 Synthetic.
Brake fluid :
SAE J 1703, DOT 4
Rear Axle & Front Live Axle :
85W140 API-GL-5
Power Steering :
ATF - Dextron III-D
Engine oil grade
SAE 15W40
SAE 5W30
TECHNICAL INFORMATION
Coolants :
Presence of dirt in coolant chokes up passages in radiator,
cylinder head and crankcase, thereby causing overheating
of engine.
To prevent rust formation and freezing of coolant inside the
passages of radiator, crankcase and cylinder head use
premixed coolant as recommended.
It is recommended that the entire cooling system should be
drained and filled with fresh premixed coolant.
Windscreen Washer Antifrost
Concentration -
1:5 For 0
1:1 For 10
2: 5 For 16
1: 0 For 37
We strongly recommend to refill your vehicle's engine
coolant only at a TATA Authorised service centre.
0
C
0
C
0
C
0
C
NOTE
133
Advertisement
Table of Contents
