Table of Contents
Advertisement
IF YOU HAVE FLAT TYRE & JACKING POINTS
5. Place the jack below the jacking
points and lift the vehicle slowly.
These points are located approx. 920
mm behind the front wheel and 700
mm ahead of the rear wheel.
6. Remove wheel mounting nuts, which
were loosened earlier and take out
the flat tyre.
7. Roll the spare wheel into position and
align the holes of the wheel rim with
studs fixed on hub.
8. Reinstall the wheel nuts (tapper end
inward) and tighten all the nuts
properly by hand.
9. Lower the jack completely , so that
tyre rests on the ground and retighten
the nuts by using wheel spanner.
10.Press fit the wheel cover back (if
fitted)
11. Fix the flat tyre in the place of spare
wheel by following reverse steps of
removing the spare wheel .
11. Keep all the tools and jack to its
original place.
JACKING POINTS :
A. FRONT JACKING POINT
B. REAR JACKING POINT
Jacking Point - Front
IN CASE OF EMERGENCY
B
A
Jacking Point - Rear
101
Advertisement
Table of Contents
