Reset Life Counter - Epson AcuLaser C9200N Service Manual

EPSON AcuLaser C9200N

5.2.3 Reset Life Counter

PURPOSE
Whenever the parts (units) which record the life counter (consumption) in the printer
are replaced with new one, the life counter of corresponding the parts must be reset (set
to "0").
PROCEDURE
1. Assemble the printer completely.
2. Turn the printer on to keep on pressing [Left], [Up], [Down] and [Right].
3. After the printer has been activated and
on the LCD panel, release the buttons which are being pressed.
4. Press [Up] or [Down] a few times to select
5. Press [Up] or [Down] a few times to select
to reset the life counter.
ADJUSTMENT
MAINTENANCE MODE is displayed
" "
Maintenance Menu and press [OK].
" "
Reset xxxxx Counter and press [OK]
" "
Table 5-1. Reset Life Counter List
Unit
Maintenance unit
Feed Roller (C2)
Feed Roller (C3)
Feed Roller (C4)
Adjustment
Revision D
Menu Name
Reset Maint Counter
Reset LC2 Counter
Reset LC3 Counter
Reset LC4 Counter
317
Confidential