Adjustments; Camera Section Adjustments; Preparations Before Adjustment (Camera Section); List Of Service Tools - Sony CCD-TRV15 Service Manual

CCD-TRV15/TRV15E/TRV15EP/TRV15PK/TRV25/TRV25PK/TRV35/TRV35E/
TRV65/TRV65PK/TRV85/TRV93/TRV215/TRV615/TRV815
5-1.

CAMERA SECTION ADJUSTMENTS

1-1. PREPARATIONS BEFORE ADJUSTMENT
(CAMERA SECTION)

1-1-1. List of Service Tools

• Oscilloscope
• Adjusting driver
Ref. No.
J-1 Filter for color temperature correction
(C14)
J-2 ND filter 1.0
ND filter 0.3
J-3 Pattern box PTB-450
J-4 Color chart for pattern box
J-5
Adjusting remote commander
(RM-95-remodeled partly) Note 1
J-6 Siemens star
J-7 Multi CPC jig
J-8 CPC-7 jig
J-9 Power code Note 2
J-10 AFM DEV jig
J-11 Clear chart
J-12 Extension cable (16P, 0.5 mm)
J-13 IR receiver jig
J-14 Extension cable (48P, 0.8 mm)
Note 1: If the micro processor IC in the adjusting remote
commander is not the new micro processor (UPD7503G-
C56-12), the pages cannot be switched. In this case, replace
with the new micro processor (8-759-148-35).
J-1 J-2
J-6 J-7
J-11 J-12
SECTION 5

ADJUSTMENTS

• Color monitor
• Regulated power supply
Name Parts Code
J-6080-058-A
J-6080-808-A
J-6080-818-A
J-6082-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A
J-6082-311-A
J-6082-382-A
J-6082-223-A
J-6082-312-A
J-6080-621-A
J-6082-357-A
J-6082-383-A
J-6082-188-A
J-3
J-8
J-13
• Vectorscope
• Digital voltmeter
Auto white balance adjustment/check
White balance adjustment/check
White balance check
White balance check
For checking the flange back
For adjusting LCD block
For the color viewfinder adjustment
For adjusting the video section
For connecting the battery terminal and DC power supply
For adjusting the deviation
For extension between the CD-197/198 board (CN401) and
VC-195 board (CN501)
For adjusting the IR transmitter
For extension between the DD-105 board (CN401) and
VC-195 board (CN914)
Note 2: Connect the adjusting remote commander to the LANC
jack, and set the HOLD switch to the "ADJ" side.
J-4
J-9
J-14
Fig. 5-1-1.
5-1
Refer to page 3 as Table for distinction
functions of models and classification
Usage
J-5
J-10