Adjusting On Screen Display (Osd) Position - Sony KDF-E55A20 Service Manual

2-6. ADJUSTING ON SCREEN DISPLAY
(OSD) POSITION
Use the DCP_OSD category to change the OSD.
1. Access Service Adjustment Mode and select the TV service menu.
2. Press 2 until the DCP OSD category displays.
3. Press 1 until the RP1H item (#16) displays.
4. Verify the data value is set to 0.
Data Value
Category
Item #
DCP OSD 16
RP1H WIDE ZOOM
WSL:
Item
5. Press 1 until the RP1L item (#17) displays.
Category
Item #
DCP OSD 17
RP1L WIDE ZOOM
WSL:
Item
KDF-E55A20/E60A20
0 SERVICE
VIDEO 1
2 480I
Data Value
250 SERVICE
VIDEO 1
2 480I
6. To move the OSD:
to the right, increase the data value by pressing 3 .
to the left, decrease the data value by pressing 6 .
Note: To go back to the last saved data value, press 0 then ENTER
on the Remote Commander to read the memory.
7. To write into memory, press MUTING then ENT on the Remote
Commander.
8. To exit service mode, turn the power off.
KDF-E55A20/E60A20
36