H/V Center Confi Rmation And Adjustments - Sony KDF-E55A20 Service Manual

2-5. H/V CENTER CONFIRMATION AND ADJUSTMENTS
Please check the picture horizontal/vertical center after the replacement of the Optics Unit Block Assembly or any part of the Top assembly.
1. Check the H/V center with 480i monoscope signal in "Full" mode.
2. If the center is shifted, adjust using the following service items:
NOTE: Please record the steps shifted as
3. Change the WIDE mode to "Normal" and change the register data as follows:
4. Display the Twin Picture with the "split" button of the remote commander and change the registers data as follows:
5. Press "Favorites" button and change the registers data as follows:
KDF-E55A20/E60A20
MDHP and MDVP .
MDHP
MTCP 9 MDHP (for H center)
10 MDVP (for V center)
MDVP
MTCP 9 MDHP + MDHP
(Don't change the MDVP data)
MTCP 9 MDHP + MDHP
10 MDVP + MDVP
MTCP 9 MDHP +
10 MDVP +
KDF-E55A20/E60A20
MDHP
MDVP
35