Makita LXMU02 Instruction Manual page 7

accessory shear blades.
1
012533
Remove the base frame and place the tool upside down.
CAUTION:
Before placing the tool upside down, be sure to
•
remove the base frame.
1
3
4
012535
To remove the shear blade, press the locking lever and
with the locking lever pressed turn the undercover
counterclockwise until the symbol
is aligned with the symbol
3
012536
Take out the undercover, shear blade and crank in order
from the tool.
1. Blade cover
1. Locking lever
2. Undercover
3. Press
4. Turn
2
on the undercover
on the locking lever.
1. Undercover
2. Shear blade
3. Crank
1
2
1 2
012537
To install the grass shear blade, prepare the crank,
undercover and new grass shear blade.
1
012538
Take out the blade cover from the old shear blades and
fit it onto the new ones for easy handling during the
replacement of blades.
1
012539
Adjust the three pin position so that these pins are lined
up at right angle in relation to the basic alignment line on
the tool housing.
1
4
012540
Fit the crank with its recessed part facing upwards onto
the pins. At this time, apply a small amount of grease to
the periphery of the crank using grease that the shear
blades as optional accessory are provided with or that
remains inside gear housing.
7
1. Crank
2. Undercover
3
3. Shear blades
1. Blade cover
2. Shear blades
2
1. Basic alignment
2
line on the tool
housing
2. Pins
1. Recessed part of
crank
2
2. Crank
3
3. Apply grease
4. Pins