Basic Operations; Turn On The Power; Select The Source To Play - JVC RX-D401S Instructions Manual

Basic operations

1
Source lamps
1
4
7
10
1

Turn on the power

Press STANDBY/ON (or
remote control).
The standby lamp goes off and the source lamp of the current
source lights in red.
Current source name appears.
ANALOG AUTO SURR
L R
S.WFR
To turn off the power (into standby)
Press STANDBY/ON (or
again.
The standby lamp lights in red.
NOTE
A small amount of power is consumed in standby mode. To turn
the power off completely, unplug the AC power cord.
16
2 3
1
2
3
2 3
5 6
8 9
0 10
AUDIO on the
TUNED STEREO AUTO MUTING
MHz
AUDIO on the remote control)
2

Select the source to play

On the front panel:
Turn SOURCE SELECTOR until the source name
you want appears on the display.
The source lamp corresponding to the selected source lights in
red.
• As you turn SOURCE SELECTOR, the source changes as
follows:
ANALOG
AUTO SURR TUNED STEREO AUTO MUTING
L R
S.WFR
DVR/DVD VCR
TV USB FM
(Back to the beginning)
DVR/DVD: Select this for the DVD recorder or DVD
player.
VCR: Select this for the VCR.
DBS: Select this for the DBS tuner.
TV: Select this for the TV.
USB: Select this for the PC component.
FM: Select this for an FM broadcast.
AM: Select this for an AM broadcast.
From the remote control:
Press one of the source selecting buttons.
NOTE
When connecting a video component to HDMI VCR (DBS) IN
terminal or COMPONENT VCR (DBS) IN jacks, "VCR" and "DBS"
are assigned for the source you have selected in "HDMI SELECT"
and "CMPNT SELECT" (see page 26).
Selecting the video input setting
You need to select the proper video input setting according to the
connection method on pages 9 to 13.
From the remote control ONLY:
Press VIDEO INPUT to select the video input
setting.
• Each time you press the button, the input setting changes as
follows. This setting is memorized for each source.
AUTO SURR
DIGITAL
L C R
S.WFR LFE
DIGITAL
LS RS
HDMI CMPNT
(component)
C
(composite) (Back to the beginning)
NOTES
• For "VCR" and "DBS," you can select "HDMI" and "CMPNT" for
the source you assigned in "HDMI SELECT" and "CMPNT
SELECT" (see page 26).
• When the video input setting and the audio input setting are
both set to "HDMI," changing the video input setting changes the
audio input setting (see page 17) to the appropriate setting.
MHz
DBS
AM
S
(S-video)